4 Causes of a Constantly Running Furnace in Johns Creek, GA
Normally, furnaces turn off and on frequently in order to maintain a comfortable temperature in your home. If your furnace in Johns Creek, GA, is constantly running, it could be a sign of a problem. Read on to learn about four common things that make a furnace run continually.
1. Dirty Filter
A dirty filter can impede airflow and cause the furnace to run longer than necessary to maintain a comfortable temperature in your home. We recommend changing the filter every three months or more frequently, if needed.
2. Malfunctioning Thermostat
If your thermostat isn’t working properly, it can cause the furnace to run constantly to maintain the desired temperature. Check the batteries in your thermostat, and if it’s an older device, consider swapping it for a newer one. Smart thermostats can let you program your furnace’s activity, control your home’s temperature when you’re away and even potentially diagnose issues.
3. Leaking Ductwork
If your ductwork is in poor condition, the hot air from the furnace can escape through cracks or unsealed area, leaking this warm air into your basement of attic area. This, in turn, means that the furnace needs to run longer to get the appropriate amount of heat throughout your home. It may be worthwhile to have a professional inspect your ducts for wear, tear and damage.
4. Damaged Blower Motor
If there’s something wrong with your furnace’s blower motor, it can cause the furnace to run constantly in order to generate heat. A variety of things, such as dust, dirt or even age, can cause a blown motor. When you have problems with your motor, we suggest contacting a professional to inspect it.
If your furnace won’t stop running, contact us at Comfort Atlanta Heating & Air in Johns Creek, GA, and we’ll be happy to diagnose the cause and get you started on a reapir. We have over 10 years of experience diagnosing and repairing furnaces, so let our professionally trained HVAC technicians help you get your furnace back in working order.
Image provided by iStock
You May Also Like
HVAC manufacturers design heat pumps to heat or cool your home in cycles. Therefore, if your unit runs without stopping, there is… Continue Reading What Makes a Heat Pump Run Constantly in Milton, GA?…
If your furnace has already been in your home for more than a decade, it may be time to start considering a… Continue Reading These 4 Issues Mean It’s Likely Time for a New Furnace in Alpharetta, GA…
Geothermal heat pumps are different from the traditional HVAC systems in Sandy Springs, GA. As a result, they often require different troubleshooting… Continue Reading Troubleshooting Your Geothermal HVAC System in Sandy Springs, GA…